The current position:

Guidelines for Survey of Marine Products 20161028 Amendments

release time:2016-10-28 08:10


J01 WELDING CONSUMABLES
Increase the additional requirements to determination of diffusion hydrogen content.

P01PUMPS
IACS UR_G3 (Rev.5 2013) are replaced by IACS UR_G3 (Rev.6 2016), and added item 1.2,
The original 9.3.3 (4) was adapted to 9.3.4 (4).
Effective date of this amendment: 1 January 2017.

L08LIFEBOAT RELEASE
The “(4)MSC.1/Circ.1529 UNIFIED INTERPRETATIONS OF PARAGRAPH 4.4.7.6 OF THE LSA CODE,AS AMENDED BY RESOLUTION MSC.320(89)”clause in the “2.1 The reference documents for approval and inspection of lifeboat release mechanisms described in this Guideline are as follows”
“8.2 (2) ①”The PREN≥25 changed to PREN≥22; “8.2 (2) ②” The PREN<25 changed to PREN<22; “8.2 (2) ⑤” changed to “Austenitic stainless steels 201, 304, 321, 347 are susceptible to pitting and crevice corrosion and, therefore, unsuitable for these applications. For operating cables covered with sheath and installed inside the lifeboat, inner cables made of austenitic stainless steels 304 are acceptable without the corrosion test above.”

L07 Pyrotechnic Signal clean
Add MSC.323(89)Amendments to MCS.81(70) Revised Recommendation on Testing of Life-saving Appliances to the Basis for approval and inspection.
Add MSC.323(89)11 to the Regulations 6 in the table 6.2 about Floating smoke signal.

A05MARINE PLASTIC PIPES and so on
The “material and components” is amended to coordinate with the rules.

E06STORAGE BATTERIES and so on
Corrigendum
Effective date: October 28,2016


Note: If you need to reprint, please indicate the source of the information.